Coffee Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 22 Results
  1. Coffee Accessories
    I'm enjoying the benefits of having a 3D printer, one of which is I can use it for coffee related accessories. Over the past few days I've been printing enclosures for PID and speed controllers, and wired them in, and prior to that I have printed a WDT, a low profile extended drip tray and a...
  2. Gaggia Forum
    New White Mr Shades Deep Slim Drip Tray.
  3. Gaggia Forum
    Hi All. I'm gearing up to pull my first shot form my new (to Me) Classic. can anybody recommend a good cheap (ish) set of scales that fit under a Standard Portafilta and a Standard Drip Tray.
  4. Gaggia Forum
    The loose fitting drip tray of the Classic is a bit of a pet peeve of mine. I thought I'd share this quick fix I've made, by affixing five 0.5mm x 15mm neodymium magnets to the bottom of the tray allowing it to grab on to the chassis. The magnets only have ~0.3kg of pull each you can still...
  5. Coffee Accessories
    Hi there! First post, and I had a question about options for little mods I've googled and searched this forum for many bottomless portafilter options for the Gaggia Classic. However, there seems to be some discrepancy with the post-2015 models. I have the newer post-2015 model, and many places...
  6. Introductions
    Hello, I have decided to finally join this forum after referring to posts on here for some time now to get information about my pre 2015 Gaggia classic. I currently have a few issues with it that have arisen recently. Firstly, the shower head no longer flows like a shower, but a single stream...
  7. Gaggia Forum
    I have found a 3D printer file for the 15mm Gaggia Classic drip tray and I'm trying to get a print of it. I wondered if anyone had a 3D printer or knew of a company who would do a single run cheaply. I contacted someone today and it was initially going to be £70 with a potential reduction to...
  8. Rocket Forum
    Hey All Just wondering if I am missing an obvious trick. Have finally got around to completing the plumbing of the R60. Water in - no problem at all. Water out is fine 99% of the time. However, if a lot of water goes through at the same time the drip tray leaks. May be difficult to explain but...
  9. Gaggia Forum
    Hello All, I've been looking for a shallow drip tray or my classic and have come across this: http://www.gaggia.uk.com/caffeshop.htm#!/Stainless-Steel-Metal-Drip-Tray-for-Classic/p/65656223/category=3540309 I like that it's stainless and slim enough so I can just about fit a normal mug under...
  10. Sold
    Hey Coffee Forums, So I created a thread yesterday to gather if there was any interest in a slim drip tray for the Gaggia Classic (to enable taller cups/scales). It turns out I'm not the only person who has suffered this issue. Given I have a 3D printer, I printed one for myself and am happily...
  11. Gaggia Forum
    Hey Coffee Forums. Just a thread to ask if anyone had interest in some slim drip trays for the Gaggia Classic - I made one for myself (I just bought some Acaia Pearl scales), and needed some extra room. I've attached a picture, for reference - the original is ~50mm high, this is just 15mm - it...
  12. Sold
    This is an official Gaggia part, bought from a Gaggia outlet in Braintree for £49 last month (Dec '16). It replaces the rattly plastic tray, looks rather smart (in my opinion) and gives a little more space for digital scales (or taller glasses) underneath the spouts. Apart from a picture of the...
  13. Fracino Forum
    First off, loving the new look, Admin! Couldn't find my bookmark icon for a minute Is there a thin wire, deeper drip tray available that will fit a Heavenly? The STD tray has more closed area than open. Also re. the dial, I have looked into judging a shot by the pressure under extraction, but...
  14. Technical | Faults | How-to's
    Hi, I'm new to home coffee machines and was wondering if this is normal? On my Delonghi EC820 I can extract a shot of espresso no problem. When I switch the boiler to steam and it gets up to temperature, the machine dumps a load of water into the drip tray. Is this normal? Sometimes it just...
  15. Rocket Forum
    Chaps, Anyone know where I can get a drip tray for my V2? They are interchangeable with my older ECM, so one of those would do. Even better if a forum member was selling one. I know..... why would I want one? Well , the chap I purchased my v2 from, had 'mislaid' it in a house move! So if you...
  16. Coffee Lounge
    How are we all? This is my first post! Here goes.. Does anybody know of a good place to get custom drip trays cut to size? I have a filter bar going into a cafe, with some Acaia pearl scales, that are to be set into the counter top. This is for our chemex/filter station. We want it to look a...
  17. Rancilio Forum
    Hi guys Just got my machine v3 for the office from hasbean and wondered any tips for a new user to consider?? Also the cups wobble around with the vibration of the machine any tips to stop that??? Pairing it up with my eureka mingon for the grind. Shall I get a naked PF and vst?? Thanks in...
  18. Fracino Forum
    You'll be interested to know that Fracino have developed a variant of the Cherub called the Ariete. This machine has a lever on the group head to dispense espresso rather than a switch, has flick valves and wooden handles and is priced at just a bit more than the standard Cherub from April 1st...
  19. Rocket Forum
    Has anyone modded there drip tray for a waste line?
  20. Coffee Lounge
    Anyone here have access to metalworking facilities. I mean pretty simple stuff here. Let me explain... the drip tray on the fracino is still not ideal. Its a lot better, but IMHO trying to have clever pretty patterns on drip trays doesnt work. It just means water ends up splashing off the parts...
1-20 of 22 Results
Top