Coffee Forums banner
Cancel
Create thread New Forums

Search results for query:

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Gaggia Forum
    This looks to be the same switch from a site you can access I think I think there are listing for higher ampage in tge same size from other makers. https://il.farnell.com/arcolectric/h8550vbaca/switch-dpst-10a-250vac-black-i/dp/273200?st=dpst%20rocker%20switch All 3 switches in mine have 4...
  2. Gaggia Forum
    The size of the switch is standard for a miniature switch and the same as the existing push button and should fit the, terminals are the correct size, the spacing of the terminals is different just because the insides of the switches are different so long as you get the 4 terminal version per...
  3. Gaggia Forum
    I think you need the miniture version, with a 13mm x19mm base to fit the existing slots, dpst (double pole single throw) I don't think the illuminated switch will work instead of the existing indicator lamps though, the hole in the case is only 62mm wide so won't take 3 standard 22mm...
  4. Gaggia Forum
    Once I've sorted the steam valve I've got an idea for converting it to rocker switches and the UK site I got tge valve from doesxa pressure regulator valve mod
  5. Gaggia Forum
    After a night soak in 10% citric acid it still took me the better part of an hour with a needle in a pin drill to pick all the holes clear in the shower screen and filter basket, both appear to be stainless steel, so I'm thinking would soaking them in Hydrogen peroxide to chemically burn out the...
  6. Gaggia Forum
    They get a lot of flack for not being as good as the pre 2015s, can't compare but it pulled a shot not dissimilar to the one I had at the roasters second try after a thorough descale, and clean of both the shower screen and basket perforations
  7. Gaggia Forum
    I've searched for this subject and the closest I've found was a thread on changing the knob. From that it would seem I need to remove the boiler to get the valve out, I've already sourced a new one as the old one is leaking, and I think I'm going to need to take a dremel to the hose clips as...
  8. Gaggia Forum
    Yes it works it is the exact same switch same manufacturer all part numbers on the item match, I actually shaped the steam button switch for the brew button switch as a temporary fix and then replaced the steam button switch with the new one when it arrived, they are not the right part...
  9. Gaggia Forum
    Pity I didn't read that yesterday all 3 appeard to be latching on mine, the brew button wouldn't release and showed signs of arching out, so I swapped it for the steam switch just had 3 delivered that are sold for a delongie but I took the risk on them as they were cheap, they are actually...
  10. Gaggia Forum
    I noticed that double tag when I took the top off mine it seems un necessary I'm contemplating adding a earth tag to the main casing if there isn't one and repositioning one of them
1-10 of 10 Results