Search results for query:
Discussions Showcase Albums Media Media Comments Tags Marketplace
1-16 of
16 Results
-
🪛🔧 Technical | Faults | How-to's ❓ℹGot my new pump and installed it. Everything's back to normal. The machine is noticeably quieter than before, maybe the pump had been slowly on its way out for a while. Thanks for your help, @El carajillo!
- 8
- 2K
-
silli posted
-
🪛🔧 Technical | Faults | How-to's ❓ℹNo kinks, checked twice ;-) Thanks for sparring, now there's light at the end of the tunnel. I'll try to source the same part.
- 8
- 2K
-
silli posted
-
🪛🔧 Technical | Faults | How-to's ❓ℹThanks for the tip on testing the pump. I did exactly that. There's very little coming through, probably something like 20 cc / min. See here. So that means I have a faulty pump, right?
- 8
- 2K
-
silli posted
-
🪛🔧 Technical | Faults | How-to's ❓ℹThanks for the reply, much appreciated. Roger that, I'll get some proper descaler and try with that. This is not a hard water area at all, quite the opposite. I've removed the brew head screen, cleaned (and replaced, a while back) the gasket, and backflushed. But I haven't taken it completely...
- 8
- 2K
-
silli posted
-
🪛🔧 Technical | Faults | How-to's ❓ℹI have a five year old Bezzera BZ10 that has just started acting up. When turning the machine on, I don't get the usual semi-loud pump noise but a quiet, smoother noise. The pump's definitely still doing something. The boiler apparently fills up, but it takes ages (like minutes), before the pump...
- 8
- 2K
-
silli posted
-
Eureka GrindersFair assumption, and I had cleaned it. But obviously not properly. Lesson learned.
- 34
- 13K
-
silli posted
-
Eureka GrindersHa! Got it fixed. I took the thing completely apart, vacuumed everything and checked every connection. I suspect this was my own fault, it must have been the oily grounds that clogged it.
- 34
- 13K
-
silli posted
-
Eureka GrindersSure, just need to find the exact specs first. And then replace it. Then again, who wouldn't love some soldering every now and then 🙂
- 34
- 13K
-
silli posted
-
Eureka GrindersThanks for the hint. Will have to take it apart later today. No warranty. Figures.
- 34
- 13K
-
silli posted
-
Eureka GrindersShould have bought another grinder (from a different brand); now it's broken again, has lost all torque so that it only spins when empty. Introducing a single bean makes it stuck.
- 34
- 13K
-
silli posted
-
Eureka GrindersI bought the part from lamacchinadelcaffe.com. Cost me 35€ plus shipping (which was rather high, mind).
- 34
- 13K
-
silli posted
-
Eureka GrindersThe screen arrived today and I just got it installed. That fixed the problem.
- 34
- 13K
-
silli posted
-
Eureka GrindersThanks, but I'll order it from within the EU (I'm not in the UK).
- 34
- 13K
-
silli posted
-
Eureka GrindersSo this looks like a screen problem to you, too. I was worried it might be something else, wasn't convinced it was the screen unit itself that handles touch logic. Thank you, much appreciated. I did pop the screen off and put it back together, to no avail. I'm ok with replacing it myself, just...
- 34
- 13K
-
silli posted
-
Eureka GrindersI contacted the retailer I bought my grinder from, and they instructed me to buy a new screen from them. I'm a bit hesitant to do so, as I'm not convinced the screen's the culprit. All segments light up and every spot that's supposed to react to touch does that. I shot a video of the grinder...
- 34
- 13K
-
silli posted
-
Eureka GrindersI've got the same symptoms as OP on my Mignon. Double shows a time under 10s, and can only be set shorter, not longer. Plus does nothing. Interestingly, when I start the actual grinding, the counter shows whatever time is actually set - which is not what was on the display prior to pushing...
- 34
- 13K
-
silli posted
1-16 of
16 Results