Coffee Forums banner
Cancel
Create thread New Forums

Search results for query:

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-16 of 16 Results
  1. Lelit Forum
    Needless to say, spoke too soon and the problem reoccurred. Just swapped a bb supplied steam temp sensor (took the opportunity to lower the opv to exactly 9 bar) and all seems good 👍
  2. Lelit Forum
    After a few days of aeropress tried again today and a few flushes from tap and pf and she came back to life! Thanks Dave as ever you're a 🌟
  3. Lelit Forum
    Think I have same issue but occurred several days after changing filter 😢
  4. Lelit Forum
    Hi chaps, my marax lost pressure soon after I bought it but after I think Dave suggested on here a cool down it did recover. It happened again yesterday on pulling a second shot in the morning and despite being off overnight it hasn't really improved. Won't go above 2 bar on a blind filter. Tank...
  5. Lelit Forum
    In the description below the video it says "must be performed annually". You may need to open in YouTube to view the description.
  6. Lelit Forum
    This says different
  7. Lelit Forum
    Oki doki 👍😎
  8. Lelit Forum
    Hi Dave thanks again, machine heal thyself! Water was a bit low but the light hadn't started blinking. Generally the water here is very soft (southern). I cut open my classic boiler when I changed it and the inside was pretty clean after over ten years in my ownership and it being a 2002 model...
  9. Lelit Forum
    Omg the BellaB Milk Buster is bloody delicious 😋
  10. Lelit Forum
    OK before I upload the vid, the pump cycled on start and went to full pressure. On the blind filter test it seemed OK, 2,4 then 9.5 bar. Flow seemed OK. It still seems to be running a bit warm but that could just be normal from startup. I'm going to try a Latte now. Why would it have need a...
  11. Lelit Forum
    Thanks Dave just warming her up now 😊
  12. Lelit Forum
    If it has developed a partial air lock is there anything I can do? Just checked blind basket pressure and it's barely 1 bar but boiler pressure is higher than I'd expect, over 1.5bar and increases with the brew pump on. Broken HX pumping into the steam boiler?
  13. Lelit Forum
    Hi thanks for the reply. Just took the water filter out to make sure that wasn't it. It still runs just won't go above about 1 bar pressure. There's nothing coming out the vent into the tank - opv? - so it's like it's running on just very low line pressure. I guess the pump is just a bit dead? I...
  14. Lelit Forum
    Hi all, my nearly new MaraX just lost brew pressure. The pump is pumping but nothing (very little) is happening. Yes the water is filled 😉 Any ideas before I call BellaB Monday and emark on the dreaded 30 days RTB 😭 Normally I'd have the thing open but I don't want to upset the warranty...
  15. Coffee Accessories
    Can't let this go unanswered. I have had a classic for 6 years. Prior to that it was on ebay and didnt exactly look new when I got it. Bought for £85. I replaced the portafilter gasket and cleaned everything up with pulycaf and have backflushed about once a month since. Recently I flush the...
  16. Gaggia Forum
    Hi, just registered to answer this thread I found browsing for Gaggia Classic upgrades. If you're worried about temperature stability on the Classic then you should get the brass dispersion plate to upgrade the stock aluminium job under the shower screen. Temperature cycling is much improved so...
1-16 of 16 Results