Coffee Forums banner
Cancel
Create thread New Forums

Search results for query:

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 129 Results
  1. Lever Forum 💪
    that is atypical behaviour. what grease are you using? email me & i'll send you another set of seals. buy yourself a set of Cafelat seals in the meantime so you can do a side by side test. best, reiss.
  2. Lever Forum 💪
    thanks for posting that video of the cafelat seals on an L1 tom, even if it seems to be in the wrong thread, as i achieved exactly the same results with them on the L1 now you will appreciate why we had to develop our own piston seals our seals will transform any machine that uses this group...
  3. Lever Forum 💪
    yes, we've had to increase the price but we've added a few christmas goodies to ease the pain - https://londiniumespresso.com/blog merry xmas! reiss.
  4. Lever Forum 💪
    mathof if your L1 is taking 3 hours to get up to temperature the anti-vac valve is no longer performing its task and needs to be replaced kind regards reiss. ___________________________________________________________________________________________________________ general comment - some...
  5. Lever Forum 💪
    Yes, that's right. The o- rings are viton; I'm sure you'll be able to find them around
  6. Lever Forum 💪
    throw the metal washer in the bin. chamfered face of the ptfe washer to the ball.
  7. Fracino Forum
    I'm not familiar with that model, but I think you'll find it's running over-pressure at 1.6 bar. This suggests the pressure switch is not opening when it should and therefore needs to be replaced.
  8. Fracino Forum
    What boiler pressure is showing on the gauge?
  9. Fracino Forum
    You probably know, but the old tips are chrome over brass whereas the new ones are solid stainless
  10. Fracino Forum
    We also sell the tip only, but it won't fit an old wand as thread was external, now internal on wand ☕️
  11. Compak Grinders
    I've been running some experiments with my E8 on this issue since this post was started. I think you will find that if you move your grinder to the opposite side of your machine to which your steam wand is on that you are likely to eliminate the issue. For the same reason it is much more...
  12. Compak Grinders
    Locating your grinder hard against your steam wand presents a similar risk as not drying PF
  13. Compak Grinders
    if you don't dry your portafilter before placing it under the exit chute you are almost guaranteed to have trouble. A hot steaming PF is going to send moisture up the chute with the results reported here. Not sure the flap is the culprit tbh.
  14. Lever Forum 💪
    hi there if your machine is 12 months old or less than it is a warranty issue - contact me - if you purchased second hand the warranty is transferrable, just email me and let me know who you purchased it off so i can trace to the original sale its true, these LEDs are failing prematurely a bit...
  15. New Members Section
    If you need any help with NZ, drop me a line or call. Reiss
  16. Misc
    Yes, call Fracino. I understand they have a UK network of parts suppliers, and will also supply direct. I can't think of a brand in the UK that would be easier to obtain all the parts for immediately: they carry every part in stock, unlike um, pretty much every other brand where you might wait...
  17. Lever Forum 💪
    hi phil as MrBoots says, i moved back to New Zealand with my family in May 2014 you may find it easier to email than call, or you could call me now for example or early in your morning machines are still made in Birmingham just as before and we are still operate with the same limited company...
  18. 🪛🔧 Technical | Faults | How-to's ❓ℹ
    Have you made contact with DeLonghi UK? Would be surprised if they are unable to help you.
  19. Videos 📹🍿
    Oh yes, I'm a closet masochist [emoji6]. Best thing I've read on the issue over the years is when you fasten the dosed PF to the group and then remove it the shower screen shouldn't leave an impression in the puck. It will almost always leave some form of minor impression in the puck after the...
  20. Coffee Accessories
    I've got no idea why I am replying to this as I'm in no way involved, but just to say based on video provided I believe it is running true (look at the machined circle on the end of the shaft as it rotates: it is running true). I think you will find the hexagonal machined faces on the shaft are...
1-20 of 129 Results