Coffee Forums banner
Cancel
Create thread New Forums

Search results for query:

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. ECM / Profitec Forum
    Yes, did a service for the machine as well, waiting for the new gasket to come to do some test shots. :)
  2. ECM / Profitec Forum
    Thx everyone's contribution. It turned out the brew boiler had an issue. I found a few small cracks on the heating element and replaced a new one, back to business. :)
  3. ECM / Profitec Forum
    I see! Thanks for the detailed exaplanation. :) I have tried to turn on the machine leaving the brew boiler terminals disconnected, and the mechaine didn’t trip the RCCB. I have reconnected everything, turned on the machine, the brew boiler managed to heat up to 51C then tripped the RCCB...
  4. ECM / Profitec Forum
    Thanks for your advice! I have tried to disconnect all the cables on the boiler and it looks like the joints are dry. I have also used a hair dryer to remove any moisture. One thing I noticed was I can't disconnect one of the cables from the thermostat on the side (yellow circle). It stuck and...
  5. ECM / Profitec Forum
    Hi All, I was struggling to identify the cause of my Profitec Pro 3 tripping the fusebox and would like to have some suggestions on where to start checking the machine. Here is the background: I had been using the machine for 3 years, making roughly 1 cup a day. Last Saturday, I left the...
  6. Coffee Lounge ☮❤
    Here it comes, Peak water...
  7. Coffee Lounge ☮❤
    Will see if the water tastes better than Brita filter water :D
  8. New Members Section
    I think for a budget of £300, Sage Bambino is the best choice. Unless, the budget can be stretched to £500 to get a Rancilio Silvia.
  9. Coffee Lounge ☮❤
    I guess this RO system will be something in my home in 2020. (Never knew very hard water is running in Norfolk!)
  10. Coffee Accessories
    I bought a IMS Cl 200 and it is perfectly fit.
  11. All Grinders & Hand-Grinders
    It's a very informative post! I was thinking about upgrading my mignon grinder to something else.
  12. 😎😎 Show Off Your Setup 😍😍
    Congratulation!! It's a very nice machine!
1-12 of 12 Results