Coffee Forums banner
Cancel
Create thread New Forums

Search results for query:

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Sold
    Thanks for the input and comments. I would agree that its a great machine which I have been very happy with, its interesting how subtle the difference between shots pulled on the Juniour vs GS3, although you have to pay more attention to flush etc.
  2. Sold
    Surprised no interest in this great machine...? price reduced to £750.
  3. Sold
    Open to very near offers, Can look into freight at cost if necessary. Thanks, Luke
  4. Sold
    Selling my Cimbali M21 DT1 Juniour due to the arrival of a new GS3 MP. The machine is in excellent condition, there are a few light scratches on the side panels which should polish out. Build date 09/2008 and has been fed with frequently tested softened and filtered water. After installing...
  5. 🪛🔧 Technical | Faults | How-to's ❓ℹ
    I have a GS3 MP plumbed into the mains- the front panel coffee boiler pressure gauge will show the static incoming mains pressure when the pump is off and the paddle valve in the shut position. 2.5 to 3.5 will be OK, I have fitted a pressure reducing valve in line to mine to keep at 3 bar. I...
  6. 🪛🔧 Technical | Faults | How-to's ❓ℹ
    Any 10" housings will do; I chose the Atlas ones because they make twin and triple cartridge set-up which are neater than joining singles. Also the clear ones are available in a Sanic version so they suppress bacterial growth which can be a problem with normal clear housings exposed to daylight...
  7. 🪛🔧 Technical | Faults | How-to's ❓ℹ
    We use an XL Everpure setup in a commercial environment and have been pleased with it so far, lasts a long time before the hardness starts to creep up / resin exhausted. I would imagine it could last 18 months in domestic use but the water should be tested periodically with a Hach 5B Titration...
  8. 😎😎 Show Off Your Setup 😍😍
    Thank you. I started with pre infusion at 6 seconds based on comments I had read on the internet and have tried at 4 seconds, I couldn't taste the difference or see a difference in the extraction using a bottomless PF. I would say on average 4-5 sec with a 38-40 sec pump run time using Monmouth...
  9. 😎😎 Show Off Your Setup 😍😍
    Thanks, will have to build up the courage to undertake this mod...do you know how much variation there is between the front panel brew pressure gauge and what the puck is exposed to? From the factory it was reading around 10 bar during brewing with 2.8 bar line pressure, I adjusted this down to...
  10. 😎😎 Show Off Your Setup 😍😍
    Congrats, I got my GS3 MP a few weeks back and I'm loving it so far. Coming from a Cimbali M21 it took a while to get used to the toggle style steam valve but I am appreciating the pre infusion and ability to quickly adjust the temperature. Its masterpiece of engineering and a shame to cover up...
1-10 of 10 Results