Search results for query:
Discussions Showcase Albums Media Media Comments Tags Marketplace
1-11 of
11 Results
-
🪛🔧 Technical | Faults | How-to's ❓ℹSo this morning I turn the machine on and within 5 minutes pressure bar climbs rapidly to a constant 12bar and could hear the water dripping from the pressure release valve. If anyone could guide me on what else I need to check I'd appreciate any help I can get.
- 19
- 3.2K
-
🪛🔧 Technical | Faults | How-to's ❓ℹThank you both for your replies...I appreciate them very much. Making cuppajoe and the machine is working very well. Just made these for my wife and I. I know I suck at Barista Thanks again... Kind regards,
- 19
- 3.2K
-
🪛🔧 Technical | Faults | How-to's ❓ℹNo disrespect meant but I think that's incorrect i think the release solenoid is not open long enough but what do I know
- 19
- 3.2K
-
🪛🔧 Technical | Faults | How-to's ❓ℹOk so I cleaned and descaled both the "one-way valve" and the Pressure relief Valve". They were pretty bad! The one-way valve rubber oring was finished! I replaced it and am happy to say no more backflow of my water. It now creates a new problem and am at a loss of what to do. My pressure bar...
- 19
- 3.2K
-
🪛🔧 Technical | Faults | How-to's ❓ℹI will...thanks for your help. I will keep you posted on the outcome. Kind Regards,
- 19
- 3.2K
-
🪛🔧 Technical | Faults | How-to's ❓ℹThanks soo much for your response...I have since fixed the expansion valve but need to tackle the backflow prevention but am unsure where and what it is. Looking at the drawing would you know if its part number 13?
- 19
- 3.2K
-
-
🪛🔧 Technical | Faults | How-to's ❓ℹI would suggest to install our filter head w/o NRV # 812411, without the back flow preventer's. In this case pressure will be released back to the feed water source. I've asked them to explain what this line means and they have stopped responding Anyways...I have since installed a pressure...
- 19
- 3.2K
-
🪛🔧 Technical | Faults | How-to's ❓ℹI have written to BWT since I suspect the pressure readings you describe are related to the machine and also our filter head. Usually at any espresso/coffee machine there is a back flow preventer (check valve) installed. But from time to time those are removed or not even included. (depends...
- 19
- 3.2K
-
-
🪛🔧 Technical | Faults | How-to's ❓ℹHello, I just installed a BWT filtration system http://prntscr.com/n8rqqg And after every shot my gauge does NOT stop going up... http://prntscr.com/n8rraq I couldn't figure out why this was happening but after removing the filter and having the water connected directly my gauge now reacts...
- 19
- 3.2K
1-11 of
11 Results