Coffee Forums banner
Cancel
Create thread New Forums

Search results for query:

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 30 Results
  1. Mahlkönig Grinders
    look here: and here:https://youtu.be/OGVX54-VMq0 It is perfect, with both burrs, Mahlkonig and SSP burrs. greetings juergen
  2. Mahlkönig Grinders
    EK43 Limited, alignment by sanding technique nearly below 5um or better, new red speed SSP burrs mounted, consider parallactic needle deviation. Better does not work! Standard alignment by Mahlkonig for the limited version is 30 um max. greeting juergen
  3. Mahlkönig Grinders
    @bpchia ad1) First put the glue to the sandingpaper backside and at the burr backside, wait 15 minutes and put them together. Next cut it out with a cutting knife on a granite table. Sanding the fix burr: greeting juergen
  4. Mahlkönig Grinders
    @bpchia any questions? Greeting Juergen
  5. Mahlkönig Grinders
    The misalignment of the carrier can not be transmitted to the grinding housing during grinding because only the high point determines the grinding or sanding in.
  6. Mahlkönig Grinders
    Clogging is a sign of abrasive result. Perhaps you have to change to 200 grit paper. You have finished, when the scrub marks takes 360 degree.
  7. Mahlkönig Grinders
    Sound of EK43 with 5um alignment, fixed and rotating burrs: Thanks to Matt Perger for the fake alignment:waiting: greeting juergen
  8. Mahlkönig Grinders
    completely useless.
  9. Mahlkönig Grinders
    One pitch for one rotation is normal, even by poor alignment, by excellent alignment too. Multiple pitches per rotation is a sign of waved burrs, caused by layers, used by Matt Perger.
  10. Mahlkönig Grinders
    The noise is misleading.
  11. Mahlkönig Grinders
    You habe to clean the sandpaper every 30sec., of course, and you need cutting oil.
  12. Mahlkönig Grinders
    Yes ,very curious, please, for this request MP.
  13. Mahlkönig Grinders
    Sanding technics of EK43 alignment summary ( in my opinion): The EK43 must be aligned like any other mill for grinding Espreeso. For this purpose, only the grinding burrs have to be aligned in a plane-parallel manner. The rotating grinding burr is not a serious problem because the...
  14. Mahlkönig Grinders
    Sanding the normal EK43 carrier, which ist made of stainless steel is possible too. I´ll try it this week. So long Juergen
  15. Mahlkönig Grinders
    Result after 5 min.:
  16. Mahlkönig Grinders
    Update for the sanding method to adjust the EK43 grinding house. to make a burrs-double pack, the best way is to take tesa tape:
  17. Mahlkönig Grinders
    In fact, this was my first idea: sanding the grinding house bottom by motor power using the grinder itself und using the adjustment screw (so-called adjustment spindle) for moving the carrier while sanding, but I hestitate because of the high angular velocity of the burrs (446 m/sec) and the...
  18. Mahlkönig Grinders
    tightening torques for EK43 grinding house M4: 1,4 Nm burrs M5 (fix and rotating): 2,8 Nm.
  19. Mahlkönig Grinders
    Here my radial alignment of the EK43 burrs First disassemble the grinder and remove the distance bush from the shaft. Mount the fix burr, but do not tighten the screws, so you can move the burr slightly. Put the pre-breaker onto the shaft just not touching the fix burr and look to fall in...
  20. Mahlkönig Grinders
    The chassis parts are the same. The grinder housing is fit to the motor housing using a spacial machine. It's a machine-guided merge. Angel und misalignment is gaugeable, so far I know. Each LE is adjusted 100% by the test field inidividualy to a grinding result between 120 um and 140 um...
1-20 of 30 Results