Search results for query:
Discussions Showcase Albums Media Media Comments Tags Marketplace
1-6 of
6 Results
-
Gaggia ForumWell shoot, no one had a picture of it. Everyone says hole, the machine is full of holes. But hopefully people can use my picture as reference. Key is finding the small size paper clip that fits in there and offcourse being able to open the valve. Use the two plier trick, one to hold the other...
- 8
- 4.3K
-
Gaggia ForumLooks like I found the issue. See my pic. The middle hole in the 3way valve was closed, I misanalyzed that it was working. I opened it by poking a thin paperclip through. I am so happy that it's working again.
- 8
- 4.3K
-
Gaggia ForumSorry yes, I get water out the wand and into the 3 way solenoid valve. I have cleaned the valve twice now. But I ll do it a third time. i have it out again. My guess is the blockage is there for water but not for air, need to check the valve more carefully.
- 8
- 4.3K
-
Gaggia ForumAre you suggesting my pump output is low? I meant how do I test the output of the 3way valve into the grouphead. Output out of the boiler into the 3 way valve is outputting. But I will check it for volume.
- 8
- 4.3K
-
Gaggia Forumhi I have had an issue with my gaggia classic no water through the group head. I Cleaned the whole machine first, didnt work. now, I have removed the disk and the Three-way solenoid valve. Water flows into valve. Now my solenoid valve output or its output through the group head is clogged...
- 8
- 4.3K
-
Gaggia Faults & Fixes - How ToWhat center hole? i know my solenoid valve or its output through the group head is clogged. how do i test my solenoid valve output ? I have cleaned it well twice and blown through it when it's disassembled. my solenoid is good too, it ohms out same as a spare.
- 11
- 41K
1-6 of
6 Results