Search results for query:
Discussions Showcase Albums Media Media Comments Tags Marketplace
1-10 of
10 Results
-
🪛🔧 Technical | Faults | How-to's ❓ℹI just wanted to say thanks to all of you for contributing to this thread. It's been amazing. I'm now pulling the perfect espresso. I think it's been a combination of things: A thinner gasket made a huge difference. Servicing and cleaning the OPV Starting a regime of...
- 24
- 9.2K
-
🪛🔧 Technical | Faults | How-to's ❓ℹHi After your post - I invested in some Cafiza and blind basket. I've never done backfushing before - I'm sure it'll be good for the machine. I did get some movement from the PF when under pressure and had to hold it in place at one point. I was getting a good 'whoosh' from the steel pipe...
- 24
- 9.2K
-
-
🪛🔧 Technical | Faults | How-to's ❓ℹI've just fitted an 8.5 - and it's making a difference. It's now locking at between 5 O'Clock and 6'Clock. Having stripped down the The one I had in was too thick (even though I ordered it from an official Gaggia supplier. Having stripped and cleaned the OPV too, I think the problem's solved...
- 24
- 9.2K
-
🪛🔧 Technical | Faults | How-to's ❓ℹHi - the large amount water in the video was a demonstration of what happens when the handle turns under pressure and blows. The gasket is seated correctly (although I've ordered an 8.5mm one to see if that makes a difference). Yes, th dispersion plate and shower screen all good. I...
- 24
- 9.2K
-
🪛🔧 Technical | Faults | How-to's ❓ℹHi An update. I stripped and cleaned the OPV assembly. There is now some water coming back through the pipe: It's only a small amount - is that OK? I haven't pulled many shots yet - but will try again in the morning. C
- 24
- 9.2K
-
🪛🔧 Technical | Faults | How-to's ❓ℹSurely the finer the grind - the higher the pressure? Doesn't a coarse grind mean less pressure?
- 24
- 9.2K
-
🪛🔧 Technical | Faults | How-to's ❓ℹMorning! I've run a few tests this morning. There's no grease on the seal - it's pretty new Pipe running into drip tray is releasing water at the end of the shot I placed the plastic pipes into separate containers, one with water (to feed the pump) one without. No water emerged...
- 24
- 9.2K
-
🪛🔧 Technical | Faults | How-to's ❓ℹHi - thanks for your help so far. The lugs on the new PF are the same, but not worn - and it does lock in 6 0'clock position. Just after the brew has started, 50% of the time, the handle starts moving clockwise and then goes. I haven't tried backflushing. Is there a simple technique...
- 24
- 9.2K
-
🪛🔧 Technical | Faults | How-to's ❓ℹHi I hope you can help. I have a beloved Gaggia Classic, that I've looked after over the years, taken apart, rebuilt, changed parts etc! Recently, when brewing - the portafilter handle started turning, until wooosh! it pops ou! I recently replaced the portafilter because I thought the lugs...
- 24
- 9.2K
1-10 of
10 Results