-
-
thanks for all your help. The electrician has traced it back to a faulty power cord after all. Are you able to recommend a replacement?
-
Thanks for a your help. I'm a little bit lost here, I tested the power cord with the multimeter and it works. Beyond that I am bot quite...
-
Will do, I only replached the fuse in the plug, couldn't any for the cooling tray motor. I'll do as you suggest above.
-
No nothing works, and no ewelly display lights come on. Yep I have a multimeter and shod be able to use it.
-
No, it still doesn't, the lights on the ewelly displays don't come on when I switch the power on.
-
Thank you. The cooling tray motor was not the issue (but had to change it anyway as the wires had melted together). There's no fuse...
-
Good tip, thank you. Stupid question but if there is a fuse serving the cooling tray motor where would it be?
-
Thank you Dave, much appreciated. In fact I found the wires going into the cooling tray motor had melted together, the protective sleeve...
-
I checked and it isn't the fuse, when I turn the power switch on the lights on the displays don't come and the "operating buttons" don't...
-
Hi there, I have my first issue with the Dalian. Have had it for 4 years, cleaned regularly etc. Today during coming something happened...
-
I've now done a couple of roasting sessions with the roast temp at 175c(as that's my fc temp, or thereabouts) and it's working. I'd say...
-
RDC8, no I didn't change the temp setting, but I'll do that now as per Dave's suggestion. It'll probably be the last (for...
-
RDC8, if you have time and get a chance to do a sess with Dave go for it, it'll open your eyes (at least it opened mine). With my...
-
I did the 1-day course with Dave on Saturday. To say it was worth it is a huge understatement. First of all it's a 2-3 day course in...
