-
I have restored my Classe 6 E twice now, and while it's not a "service manual" this has article numbers and how everything fits...
-
For descaling mine I went with citric acid, easy to obtain and safe for consumption (nothing is safe to consume in large doses tho...
-
In the solenoid valves on my machine there was a small disc like seal that was pressed against the seat by a spring. The disc had a...
-
@TheCitronKitchen I usually open the solenoid valves up and descale...it's only the nucleus and seat that can be affected (depending on...
-
I'm assuming I should be removing the group heads and descaling those too?
what about the solenoid valves? What's the best way to...
-
Yeah I work for an engineering company, so plenty of trades on tap, should I need anything welding etc.
you should be able to have the...
-
Thanks @Mr.Bean that's going to be super helpful!
-
Sure thing. Not Oust then!!
-
@DavecUK I'm on it!!! There were a couple of big chunks inside, but mostly just flakes.
I'm assuming it's worth doing all the pipes in...
-
I do @El carajillo, good sparky mate, who will probably sign off the van.
However, I've checked them out and for the cost I might just...
-
Thanks for the heads up. Will do.
Are you thinking continuity? Or something else?
-
Well most of the element doesn't look tooo bad, but the top end is pretty clac'd up.
Inside the boiler though!! 😳 think it's...
-
Ok, ok point taken!! 😂
I know I was taking a gamble, but I'm reasonably handy with a set of tools, so was willing to have a crack...
-
Thanks @DavecUK, good advice. I'll get the gasket ordered and whip it out to take a look.
Think it's best to work on the principle of...
-
So would you do a test fire run with the cases off first, or pull the element first?
Just trying to understand the right order?
-
No he had the portafilters, but he bought the wrong machine for a coffee bike business. Two group was just too heavy. I think he kept...
-
Cheers for that @DavecUK. I'm assuming the checking the motherboard would be to follow the instructions that are on the inside of the...
-
Cheers @El carajillo planning on the boiler pressure definitely. As it will be commercial, think I'll need it to comply with...
-
-
Some tear down pics…
would be interested in a couple of things;
1) what to use for descaling?
2) obviously I need a service...
-
Thanks for the info! Should be about there now…
-
And let's just ignore the obvious fat fingered spelling of Rancilio… 😂
-
I'll sort the images at some point. Looks like I might have to sign up to a new sharing platform.
-
So! We've picked up a dual fuel classe 6 for my wife's horse box conversion. We've gone for the dual fuel route, as it will be a little...
-
Hi all,
Stumbled across the forum whilst looking for information on a second hand Rancilo machine we've taken a punt on!
Going to...
TheCitronKitchen reacted to Mr.Bean's post in the thread Racilo Classe 6 Dual Fuel Refurbishment with
Like.
I have restored my Classe 6 E twice now, and while it's not a "service manual" this has article numbers and how everything fits...
