-
Hello again,
I saw that some of you were looking for the manual and I came across one in Italian. There is a schematic showing all the...
-
"However, the water is not "raining" the way an espresso machine should, it is more like a deluge of water mostly coming from the...
-
As @ting_tang suggests, the leaking is probably related to the descaling, leaks in the solenoid and steam wand suggests bits of scale...
-
I see water coming from the center just after the backflushing. In 1-2 days it starts raining.
I use the same scheme IMS over the...
-
@ting_tang
Okay, I was thinking along those lines of a possible clog somewhere in the line as well. I bought the machine used and...
-
Well I'm a bit late but I am having a lot of success with the double shower screen method. I stacked the OEM shower screen on top with...
-
I have been doing some reading on this water dispersion issue and came across this thread from a few years ago...
-
Of course! My first attempt has not been satisfactory, so I will continue to try different designs.
@Norvin I do have one question...
-
Thank you for your response, that was very helpful. I ended up using a soda can to cut a dispersion screen as a test and that worked...
-
Yes, the 'dispersion block' is part of the casting.
You can help a bit by countersinking the exit hole to slow down the water.
I...
-
So I was able to remove the ring that locks the portafilter to the boiler and successfully remove the gasket. It seems as though the...
-
I just purchased a used '83 Gaggia OWC from someone and the group head shower screen and shower holder were caked with old grounds and...
