-
Got my new pump and installed it. Everything's back to normal. The machine is noticeably quieter than before, maybe the pump had been...
-
Unless there is a kink in the tube from the reservoir you will require a new pump.
Just ensure you have the pump with the same inlet and...
-
No kinks, checked twice ;-)
Thanks for sparring, now there's light at the end of the tunnel. I'll try to source the same part.
-
Thanks for the tip on testing the pump. I did exactly that. There's very little coming through, probably something like 20 cc / min. See...
-
Disconnect the outlet from the pump , connect a spare piece of tube from the outlet into a vessel (cup /dish) operate the brew lever and...
-
Thanks for the reply, much appreciated. Roger that, I'll get some proper descaler and try with that. This is not a hard water area at...
-
I have a five year old Bezzera BZ10 that has just started acting up. When turning the machine on, I don't get the usual semi-loud pump...
-
Fair assumption, and I had cleaned it. But obviously not properly. Lesson learned.
-
Ha! Got it fixed. I took the thing completely apart, vacuumed everything and checked every connection. I suspect this was my own fault...
-
Sure, just need to find the exact specs first. And then replace it. Then again, who wouldn't love some soldering every now and then 🙂
-
Thanks for the hint. Will have to take it apart later today.
No warranty. Figures.
-
Should have bought another grinder (from a different brand); now it's broken again, has lost all torque so that it only spins when...
-
I bought the part from lamacchinadelcaffe.com. Cost me 35€ plus shipping (which was rather high, mind).
-
The screen arrived today and I just got it installed. That fixed the problem.
-
Thanks, but I'll order it from within the EU (I'm not in the UK).
-
So this looks like a screen problem to you, too. I was worried it might be something else, wasn't convinced it was the screen unit...
-
@Coff Hey do you know the issue was with mine to help @silli in his discussion with their supplier?
-
I contacted the retailer I bought my grinder from, and they instructed me to buy a new screen from them. I'm a bit hesitant to do so, as...
-
I've got the same symptoms as OP on my Mignon. Double shows a time under 10s, and can only be set shorter, not longer. Plus does...
silli commented on the thread Bezzera BZ10 takes ages to fill boiler, no pressure to group.Got my new pump and installed it. Everything's back to normal. The machine is noticeably quieter than before, maybe the pump had been...
Like.
Unless there is a kink in the tube from the reservoir you will require a new pump. Just ensure you have the pump with the same inlet and...
