-
Just to let you know I got sorted. Found a wiring diagram that helped, although the colours were different to mine.
-
I have just replaced the boiler on my Classic including the replacement of some connectors on my wiring loom. When I reconnected the...
-
Saffrican commented on the thread
Gaggia connectors.
All sorted and happy again. Thank you to everyone for advice, encouragement and suggestions and a big thank you to FairRecycler for...
-
Saffrican commented on the thread
Gaggia connectors.
As Clint Eastwood aka Dirty Harry said in one of his movies " a mans gotta know his limitations" I know I have reached mine electrics...
-
Saffrican commented on the thread
Gaggia connectors.
Thank you. I have bought a new one already, before I read your message.
To make things worse, as if they couldn't get any worse, I...
-
Saffrican commented on the thread
Gaggia connectors.
Irritation at stratospheric level now. The 107-8 broke a connector🤬🤬 so I will have to order a new one.
Ah, the joys of Italian...
-
Saffrican commented on the thread
Gaggia connectors.
Thank you for the info to all of you.
I have cut down the connectors as per the photograph attached. Hope this is better but I will...
-
Saffrican commented on the thread
Gaggia connectors.
Hi to everyone, I tried the various suppliers like Gaggia UK and Bean2cup and got no help. I then followed your advice and got some...
-
I am looking for 4 of these as mine have broken and burned as they have become brittle through age. They are the ones that attach to the...
-
I will need 4 of these but cannot find them on the net. Can anyone help?
-
The connectors and wires attached were off an Audi wiring loom as that was all I had to work with to see if that would work. There is...
-
I noticed that the top connectors are poor, burnt so I have tried this, cut them off and temporarily placed these positive connectors...
-
Hi Uncletits, not sure why you need to disconnect a wire. Can you explain why you would do that?
Hi AgentB, I have ordered the new...
-
Thank you to all your replies.
I have gone through the machine checking continuity and found the following:
The Blue lead from the...
-
Hi AgentB, the pump works and cold water comes but the right hand side power light does not come on. Could the switch assembly be at...
-
22.5 one side and 21.8 the other. I know nothing about electronics except how to test for continuity. Any help is greatly appreciated as...
-
When I set my meter to the OHM section, 20k I get a reading of 0.02, when I set it to buzzer I get a continuity sound from both sets of...
-
Is this the heating element?
-
I have checked the continuity of the thermal fuse and there is current flowing through so that is not the fault. I think. I replaced the...
-
Hi, thank you for your reply. The thermal fuse seems ok, although it is difficult to see through the plastic sleeve. Is there a way of...
-
Hi, my trusty Gaggia Classic has been working for years, but being typical Italian has required a fair amount of...er, involvment...
-
Look at Youtube at the Whole Latte Love videos. I learnt a lot there and highly recommended.
-
Hooray, got a new pump, fitted it and all is good! I tried the old pump and it sort of splutttered and water came out but it did not...
-
I will consider the gauge, thank you for the link.
-
I will return the OPV valve back to what it was. Apologies for the misuse of words, I did mean anti clockwise. We have been using the...
