-
@Rigadon Hi,
0 I wouldn't worry about the 0.5g increments too much. I use a £5 scale off eBay for years now, without any issues. It's...
-
Rigadon commented on the thread
Mod help/advice.
@FairRecycler thanks for the list
0- I think I have a good ratio, though I do need to get some different scales. My current ones are...
-
@larkim
Yes 0 is the most important in my opinion.
Without 0-5 I see very low chance of making consistently good extractions, so...
-
Rigadon commented on the thread
Mod help/advice.
thanks for that @MediumRoastSteam,
I totally agree with you that you need to find out who the trusted sources are, and their...
-
Don't believe everything you see on the internet (including forums).
There are plenty of people here who have PIDs on their Classics...
-
Rigadon reacted to
pagu's post in the thread
Mod help/advice with
Like.
I agree with Evergreen88 and El carajillo: - first put a 9 bar spring from MrShades or cut 4mm of your original spring, - then install a...
-
Rigadon commented on the thread
Mod help/advice.
yes, that's right. I am not sure of an exact age of the machine though as the sticker on the bottom has been removed, so the best guess...
-
I presume from your statement this is an older machine (pre owned.
In which case I totally agree with M R S, PID , pressure, wand...
-
Why did you replace the gaskets after just a month? I had my machine for a year and I haven't replaced anything. The group head gasket...
-
That's a first! Where did you read that? I'm curious.
this is the best overall improvement to that machine. You should also adjust the...
-
Rigadon commented on the thread
Mod help/advice.
If I remember right it was on a YouTube video by Whole Latte Love. The guy was going over how to 'trick out' the Gaggia Classic/Pro and...
-
Rigadon commented on the thread
Mod help/advice.
My machine is second hand, and I wanted to make sure everything was looking/working properly, so I took the boiler out and gave...
-
Hi,
I have had my Gaggia for a month or so now, and I have done my first service on it to descale and change all the gaskets, etc...
-
-
Rigadon commented on the thread
Cup Warmer Screws.
Thanks @Uncletits, you're a star. Maybe I should adjust my patience valve 🙂
-
Hello,
I recently bought a Gaggia Classic (pre '15) on eBay. I noticed the cup warmer on top is missing the 2 screws that go into the...
-
Hello,
I recently bought a Gaggia Classic (pre '15) on eBay. I noticed the cup warmer on top is missing the 2 screws that go into the...
-
Thank you @ratty and @Uncletits for your insight. I will keep these in mind when looking at mods, etc. I will also try and find dates in...
-
Hopefully you can access these. If not, it has rocker switches
-
Hi,
My first post and a complete newbie, so please bare with me if I get words wrong 🙂
I recently bought a second had Gaggia Classic...
