-
That's kind of you but I'm more than happy to source myself, should I have a go. I'm more familar with 20mm grommets for metal clad...
-
Do I have PVC tape? My wife asked me why I had so many different colours of PVC tape when I cam back in from the garage to closely...
-
Morning all, I am hoping someone can solve an issue which has come to a head today. I carefully followng the installation for Mr...
-
I also use a wifi plug - surely it is what they were designed for? :D
-
I love the PID and I don't think I could go back to my Gaggia's unmodified form. My brewing has become much more consistent.
-
... and it's even further complicated by the fact that when starting up and idle it's a closed system - but when pulling a shot it's a...
-
That was my (nervous) thinking as I fired up the machine this morning, finger hovering to shutdown the machine if the temp was heading...
-
You can either have the PID running so the temp is accurate on warm up or once it's up to temp. So long as the overshoot on warm up...
-
Perhaps - from memory it peaked somewhere between 110 and 117 degrees C briefly, before dropping back down and stabilising at 93 degrees...
-
Last night I fitted MrShades' PID kit - superb instructions and I even dug out my labelling machine to label up the cables as I went (as...
-
Having adjusted the OPV, installed the Rancilio Silvia steam wand and acquired a bottomless portafilter and ice hockey puck to tamp more...
-
Really appreciated these tips for removing the dispersion plate on my Gaggia yesterday - off in no time at all and out with the brillo...
-
OK well the best advice I can offer you regarding the shower pate is to get hold of a screw/bolt at least 2" long of the same size as...
-
Today I removed the shower screen and the group head to clean up - whilst a clean up was in order (a few photos in my thread in the...
-
AndyL, thank you for posting this guide and thank you to those of you who similarly maxed out the pressure gauge and posted about it -...
-
Hi all, I signed up a week or so ago, after lurking for a little while.
I bought a Gaggia Classic in 2007 for my girlfriend (now wife...
-
Not sized it up but I suspect a 12" bit holder would help in that Doom's day scenario (due to the cut away in the base) - I doubt my...
-
Thanks and I have a Makita impact driver at hand, if necessary!
-
Thank you for that advice - I had also bought a replacement group seal from Happy Donkey so I'll strip down and clean up the Gaggia when...
-
Thanks for posting the clever solution - the underside of our kitchen cabinet is neither as clean or as uncluttered (fluorescent light...
-
How quickly does it build up? I've been using my Gaggia for 12 months (although it was bought 10 years ago) and it has made on average...
-
MartinJ, that's a neat idea and I'm thinking that it will pass the wife test! On the basis it her machine of 10 years (which I bought...
Paper Lawyer commented on the thread MrShades Gaggia Classic PID Kit.That's kind of you but I'm more than happy to source myself, should I have a go. I'm more familar with 20mm grommets for metal clad...
