-
As a suggestion for the la pavonis and other small levers, one hand on the lever pulling down, the other hand on the handle of the...
-
i see your valrhona and i raise you https://eu.marcolini.com/shop/tablets.html
you can obviously order online. i used to get mine from...
-
lespresso commented on the thread
L1 piston gasket.
hey man, quote our prices by all means but can you please extend us the courtesy of meaningful comparison?
our seal kit (3 piston...
-
Who mentioned L1? It's got nothing to do with it. What I am saying holds true for any lever machine. Don't over think it.
-
I'm suggesting they might be able to quit the habit, at least if they have a lever [emoji6]
-
If you were to illustrate with a Venn diagram it is only where the set 'clumping' intersects with the set 'poor distribution' that...
-
Poor distribution is responsible for channelling. Clumping is not.
-
I can't speak about pump machines, but for levers clumping is a non issue. Tell me how after say 10 seconds of 1.3 bar pre-infusion...
-
CoffeeChap is your man. he will be along shortly i expect
-
No apparently something far better. Every penny spent over a Strega is money down the drain I was told.
-
this guy jim told me its just like a strega.
-
-
that's a credit to you, well done.
-
lespresso commented on the thread
Londinium 1 - P.
as the drip tray is intended to be plumbed to waste it is not deep, around 10mm
-
lespresso commented on the thread
Londinium 1 - P.
as a starting point sight glasses are a curse, which is why the L1 doesnt have one
the only reason you put a sight glass on a...
-
If you need a difference to fixate on, choose one that exists; the Izzo group is Izzo's own design, made by the same people who make the...
-
Balls.
You have just told me that you have never tried to fit one of these groups from one machine to another
You are another keyboard...
-
at 45 degrees above horizontal, or 10:30 as some prefer to call it
if you are tamping too hard this won't happen, for as soon as the...
-
fluffles
your seals need replacing if thats the case. its a sub 20 minute job. if you want me to step you through it call me on Skype...
-
If you stick thermocouples on the outside of the group and just let it sit there you can see the 'heartbeat' of the group if you like...
-
the lighter the roast, the longer the pre-infusion
if you like a chimney sweep, i mean traditional italian, roast then cut the...
-
i don't wish to contradict you but it is not correct that you have to bleed the system - ever
i don't even know what you mean by the...
-
One is a dipper connection to the boiler
One is a thermosiphon connection to the boiler
-
have you stuck some loxeal (or equivalent grease) on the gasket?
the other trick is to make 3 cuts on the inside of the gasket about...
-
lespresso commented on the thread
New L1.
hi rob
i can see where you are coming from, and truth be told i tried hard to source Ebony, but the price was just crippling and supply...
lespresso commented on the thread Is it meant to hurt this much?.As a suggestion for the la pavonis and other small levers, one hand on the lever pulling down, the other hand on the handle of the...