-
Did anyone mention the wisdom of taking lots of pix?
Having taken my old Bezzera to bits, incuding splitting the boiler, I'd agree...
-
Same as ours. Black and walnut, to go with DSOL
-
Curmudgeon, with a special interest in pedantry.
-
Difficult to see properly. It looks as if the metal base is corroded around the screw hole, so that the base cannot be secured. I agree...
-
JohnPrime commented on the thread
Bezzera bz02.
Poor thing had had a very hard life, being supplied in a pub with the horrible waters of Harrow for a few years. It was clearly...
-
JohnPrime commented on the thread
Bezzera bz02.
I have one. My refurb thread is here.
I think it's worth the asking. There's an awful lot of copper in it and so much thermal stability.
-
A report from sunny Rochdale:
Nice shiny oily beans, like a little family of beetles.
14g in an 18g VST needing a relatively coarse...
-
-
JohnPrime commented on the thread
Bezzera BZ-02.
I have a BZ02, rescued via the 'bay from a hard life in a pub. Interesting, quirky and parts still available. Nice project for somebody :-)
-
55mm SHCS from Mr Stig and a few layers of heatshrink.
-
I'll give it a go!
1 - ronsil
2 - Johnealey
3 - BillCoxfam
4 - jonners
5 - JohnPrime
6 - truegrace
7 - Gangstarrrrr
8 -...
-
We live on a Pennine where the pressure's not huge, but the RO seems to work well; it's one of the under-sink units with its own dinky...
-
I think you are; the 'cancel' is called 'stop' on the Sestos data sheet.
I can see the attraction of these Auber/ Sestos timers, but to...
-
Sure, it's down to your preference after all
The pulse option isn't a problem. The timer is just a glorified switch which sits in...
-
Hi Dylan,
For your search term, try 'adjustable relay timer'.
I've just been wondering how best to set up a timer on my MSJ. I like...
-
A small selection of chinese timer boards for experimenting with Super Jolly on-demand-ness.
Some Rave Italian Job.
Some Rave...
-
Well, if it helps with the puzzle, our BZ02s doesn't sound like that. Is the chirping noise just the valve operating?
Also, and not...
-
Dylan, that looks very similar to what's in my Bezzera. I think it's about as much use as knickers on a kipper. If your tapwater's...
-
Is it for the purpose of 'water softening'? If it is, you just need an ordinary cation-exchange resin, preferably the stuff you can...
-
^^WHS^^. We do not say the word 'Pavoni' in our house any more. It triggers memories. Keep well away.
-
No, neither wealthy nor famous, but definitely sulking having found out about Cup North, the biggest and best coffee event ever seen in...
JohnPrime commented on the thread How do I do a full descale?.Did anyone mention the wisdom of taking lots of pix? Having taken my old Bezzera to bits, incuding splitting the boiler, I'd agree...