-
removed - was obsolete - sorry
-
Update: Got the info from Marko Luther (who is the current maintainer of Artisan-Scope) that the TC4 interface with the command...
-
@Rob1 As it looks like the "digital-out" VINT Phidgets are limited and PWM does not help here. How about making your own phidget?
Just...
-
Not sure if I understand you right regards the mentioned "... won't respond fast enough".
There are 2 half cycles per sine-wave - and...
-
@Rob1 I use the SSR (mine is - as most of the ones you find on ebay etc. - a zero-cross type) not to "cut" the sine-curve. I just use it...
-
... please make sure SSR for the heater can manage to switch 250V with enough Amp (10-20A) depending on heater wattage. In most of the...
-
Hi @Rob1 .... I found this info on PWM & SSR ...
-
@Rob1 Regards use of PWM pinout of a Raspberry Pi - I am sure you cannot connect this directly to a standard SSR (TRIAC). As far as I...
-
@Rob1 As far as I understood the function of these normal* SSR - they switch on/off only when voltage is "zero-crossing" (= built in...
-
@Rob1 This is a combination of a Raspberry Pi 3 with a 7" Touch Display (xxx://www.amazon.de/dp/B01HPV7M4I) to run Artisan, connected...
-
-
As my thermocouple has a diameter of 1.5mm => used a 1.5mm drill // used a matching hex screw and "mounted" 3 nuts to get a "grip" for...
-
Hi @filthynines
I saw the message š ... and regards your questions:
(1/2) - yes, this is the k-Type and used for BT reading on...
-
Amazing the number of people who sell things as new and hardly used. Is it important that it goes to a good home or can it go to someone...
-
Hi,
I currently use the Dalian (I have it since 10/2017) with Artisan, latest version. I run Artisan on a Raspberry Pi 3+ with 7"...
-
Thank you. Sent an email ... so let's see ... will keep you posted.
-
Hello Dave - Thank you for your great advice on Dalian maintenance. I tried to find a source for Ambergrease FG2 in Germany or at least...
-
Hi
I can confirm it is M14x1.5 - I have tested it with a thread cutter.
(and in case this is of interest ... the front plate of the...
-
@RDC8,
In the meantime my Dalian has arrived and found a neat place in my cellar.
Thanks to your recommendations I now also own a...
-
PaulL I already thought about a "trolley" like this - but wondered about the 'balance' due to the small width of 430mm. But what I...
-
Hi,
As prep. for the arrival ...
I would like to put the roaster on a wooden plate with small wheels, to be able to move it around (or...
-
fyi ... I did it*
================
*ordered THE roaster ...
-
Hi @RDC8 & @DavecUK,
thank you for confirming quality and CE of the machine. That really helps me towards my decision ... and btw. I...
-
Hi RDC8,
please apologize for jumping on your thread, but as I am also shortly before buying the Delian from BB I would like to use the...
frederic commented on the thread Help with my dalian amazon coffee roaster!.removed - was obsolete - sorry
