-
I received my simple VST tamper yesterday, a little confusion with the order (I originally received a knock top), the guys happily sent...
-
In the extremely unlikely event that this position is not filled I have a +1 who is very interested, a barista from my local coffee shop...
-
What espresso machine are you using with the MC2?
-
Even after all of the above there still seems to be a lot of play in the shaft :s Will find a bigger spring and hope that takes some...
-
Large burr has been taped up, had to cut some slits into the tape for it to fit properly. Smaller burr has been glued to the little burr...
-
Taking Gary's advice I have swapped from Cravendale to 4% unhomogenised milk from Waitrose, it seems to have fixed my issue. Thanks Gary
-
-
Porlex is in pieces on my desk at work. I have wedged the larger burr in with paper (will find something stronger once I confirm it...
-
Steves plan sounds amazing! Will look at trains, etc now
-
I'm tempted to buy a 2nd Porlex to strip down and modify. Will see what finances are like towards the end of the month but Gary put me...
-
OK, the website we ordered from is http://www.t-machine.co.uk/designer.php
Please stick to the same format as the attached T-Shirt...
-
I'll let you know how difficult the boiler insulation is to fit once I receive my order. I added the insulation kit and flat shower...
-
The electric screwdriver is a fantastic idea, I've been considering attaching a motor to my Porlex but was worried it would lack power...
-
Not sure, the very bottom one near the steam wand has an on/off switch so possibly
-
Sorry guys, I haven't managed to get in front of my laptop all weekend. Will fish out the details and post them here as soon as I get home
-
The pressure gauge and the PID sitting under the Rancilio logo will be installe very soon, not too sure what the other displays are. I'm...
-
Filthy_rich85 commented on the thread
Water type.
I have a Brita water filter, plus a filter in Silvias water tank.
-
Now that's something I haven't considered.... My pressure gauge and pid are 7-14 days away but once they're installed I'll see if I can...
-
I'm using dr strangelove at the minute
Interesting you should say that Gary, didn't realise until now but it started to become more...
-
I bash the hell out of it until no more bubbles rise to the surface and swirl for a good 10-15 seconds. Maybe I should try longer, but...
-
Filthy_rich85 commented on the thread
Hello!.
Nobrob - I've had a Rancilio Silvia for nearly a year now and I'm still learning so much about every aspect of coffee. The classic you...
-
I think I've mastered consistently producing microfoam from miss Silvia, but I seem to have developed a problem;
If I leave my beverage...
-
This is a real eye opener, really shows how much goes into the competition and how much commitment and training the barista puts into...
-
I have mistakenly order 1.5kg (6 x 250g) of filter ground Extract Unkle Funka..... Would anybody like to purchase some?
Extract sell it...
-
Miss Silvia is being treated to a pressure gauge and PID, ordering the parts on Friday.....
Anybody had any experience with PIDs on a...
Filthy_rich85 commented on the thread Made By Knock (www.madebyknock.com).I received my simple VST tamper yesterday, a little confusion with the order (I originally received a knock top), the guys happily sent...
