-
Where can I buy a spare solenoid valve from?
-
Hi.Dave I think it would be a good idea to post instructions to do this with photos.
Don.
-
-
Donscarlet commented on the thread
Wormhole.
https://www.caffelab.com/barista/5313-wormhole-ring.html
-
Has anyone had any experience with the Wormhole magnetic coffee catcher 53/58mm manufacturer in Australia on sale in the EU for £16...
-
Donscarlet commented on the thread
Sage warranty.
Thank you,I bought my machine from Harts of Stur,will give them a call tomorrow.
-
Hi,how about a dedicated technical maintenance section.(already covered my mistake)
-
Hello good evening,anyone know if Sage warranty is transferable?
-
I have a Sage Barista Express,already looking at upgrading,there is so much information to take in on different machines and processes...
-
Donscarlet commented on the thread
new machine.
I would do a fair bit of research before committing to a purchase of a new machine to make really sure that is what you want,buy once...
-
Have Sage sorted out your problems?it sounds very much like water getting into the control electronics,especially if it is tripping out...
-
I am on my second machine,first machine failed in one week and was replaced.the steam wand stopped working.so probably now I am being...
-
Hi Iris the serial number is the model number which is on the underside of the machine ie BES870UK/A, the batch number will start PDC...
-
-
The baseline temperature would have to be measured at the the thermoblock as there would be heat loss via conduction and that would not...
-
You are probably right about my expectations I know the barista express has PID,as a retired control systems engineer I am looking too...
-
Can't see the point of the increment temp change. The Barista Express allows you to change temperature profile by one degree via the...
-
I use filtered tap water and descale once a month, any thoughts?
-
OK thanks I will try that.
-
Hi Iris I have done that increased by +2 deg,If I pull about 5 shots of water through the group head it rises by about 8 deg c from 82...
-
Sage hot water outlet. Anyone know what the temperature of the hot water outlet should be,I measured mine it was 82/c this seems low...
-
I bought a Sage BE,wish I had joined this forum before purchasing,I would have gone for a dual boiler or Rocket machine and a good...
-
I quite like the look of the Niche Zero,the basket size of BE is 54mm I would have a problem getting a dosing funnel,
-
I was just admiring the ECM SYNCHRONIKA DUAL BOILER machine.
-
I bought the Sage from Harts of Stur.
