-
So this morning I turn the machine on and within 5 minutes pressure bar climbs rapidly to a constant 12bar and could hear the water...
-
Thank you both for your replies...I appreciate them very much.
Making cuppajoe and the machine is working very well.
Just made these...
-
No disrespect meant but I think that's incorrect
i think the release solenoid is not open long enough but what do I know
-
Ok so I cleaned and descaled both the "one-way valve" and the Pressure relief Valve".
They were pretty bad! The one-way valve rubber...
-
I will...thanks for your help.
I will keep you posted on the outcome.
Kind Regards,
-
Thanks soo much for your response...I have since fixed the expansion valve but need to tackle the backflow prevention but am unsure...
-
http://prntscr.com/ni9sbo
-
I would suggest to install our filter head w/o NRV # 812411, without the back flow preventer's. In this case pressure will be released...
-
I have written to BWT since
I suspect the pressure readings you describe are related to the machine and also our filter head.
Usually...
-
-
Hello,
I just installed a BWT filtration system
http://prntscr.com/n8rqqg
And after every shot my gauge does NOT stop going up...
