-
3timesaday posted the thread
Flavours! in
Niche.
Hi,
I've just received my Niche. I was previously using a Baratza Sette. I switch because I use many different beans and I hated the...
-
Hi all, latest development: the vendor finally changed the pressure gauge under warranty, and changed the antivaccuum gauge. Everything...
-
Thanks guys, will contact my vendor.
FYI, first machine I got never initiated properly. Second one has the following issues : pressure...
-
Hi,
I have noticed that when my machine pump runs at max, the pump pressure and motor sound are not regular. Pressure oscillate about...
-
Annoying yes, but from what I understood, they won't change it because it's working inside expected range…
Thanks for the...
-
Hi all! Quick update and a question.
I went back to my vendor and he contacted Lelit. They answered:
1. Pressure gauge may have +/-...
-
-
3timesaday commented on the thread
PID for dummies.
Thanks all, definitively, fiddling with PID settings will not be my cup of tea…
-
Hi,
Does anyone have a link that clearly explains PID parameters and their effect on the machine behavior?
I've seen a few site...
-
Yes agreed. Thank you too for sharing.
-
This was in a previous post… Es = 5, T = 145…
thanks all for sharing your results!
-
So, things seems to be a little clearer… I did some test on pre infusion pump time and ES parameter. Results are below. My...
-
Reading through advanced settings: @ortinga make sure your steam boiler in not in eco mode, and advanced setting EVS =1…...
-
My results with the blind filter test. First image at 145C, second at 140C. Maybe there is a small offset on my gauge…
-
@ortinga: with my new V3, I wasn't able to go over 2.2 with factory settings. According to @DavecUK, that approximately the most you can...
-
Thanks for your answer. I have not tested sufficiently my setup to be able to point out any particular problem or limitation. That's the...
-
Hi,
I've been using a Baratza Sette 270 for a year or so. I recently changed my entry level espresso machine for a Lelit Elizabeth...
-
Thanks Dave, I guess I forgot to include altitude and atmospheric pressure somewhere… that being solved (happy to know there is...
-
😀 this is exactly why I question the internet, I don't trust the internet! 🤔 another good topic would be how to simply modify your...
-
I read through all the Dave's review… great work!!
The 4 bar pre-infusion idea came from this guy:
Even with my steam...
-
-
-
Thanks for the quick response. Could you repost that link? Thanks again!
-
Hi,
Few minutes alter I start my machine set at 95C for the coffee boiler and 140C for the steam boiler, the instantaneous temp...
-
Hi,
I just got a new Elizabeth V3! I'm testing the pre-infusion feature with the steam boiler. I can't get more than 2 bar of pressure...
